Publicidad
Idiomas disponibles
Idiomas disponibles
TR107
Installation Procedure for the individual Vehicle Model
Manufacturer
BUICK
CHEVROLET
TRAILBLAZER
GMC
ISUZU
OLDSMOBILE
Vehicle preparations
Parts preparations
Stay
Cover
Follow the instructions below for the appropriate fit hook for your vehicle.
Base sheet
Bolt
Base plate
Vehicle model
Vehicle type
RAINIER
w/factory
ENVOY
rack
ASCENDER
BRAVADA
Installing System Carrier (IN-TR)
Genuine roof rail
Arrow mark
Nut plate
Model year
2005 - 2005
2002 - 2009
2002 - 2009
2003 - 2008
2002 - 2004
Clean the roof rail of the vehicle.
Slide all the 2 genuine cross bars to
the aftermost position of the vehicle.
準備
Unlock the key of your Basic Stay TR
and remove the covers from the
stays.
Prepare the bar set (sold separately).
After determining the mounting
positions, paste the base sheets on
the mounting positions of the genuine
roof rail.
Determine the mounting positions in
order for the load not to touch the
rear gate when opening and closing.
●This product is mountable at any positions on the genuine
roof rail. However, be sure to keep at least 600mm between
the front and the rear carriers.
Loosely screw together the nut plate
and the base plate using the bolt
[M6x15mm].
Be sure that the arrow marks on the
base plate and the nut plate are
facing up.
2
EN
Loading conditions
Bike
Maximum Load Capacity
100
(
kg)
45
lbs
2
( Load + Base rack
+ Attachments )
9009211TR107A2B-
EN
Publicidad
