Technical Specifications; Trademarks & Licenses - HEADRUSH FRFR-112 Guia Del Usuario

Ocultar thumbs Ver también para FRFR-112:
Tabla de contenido

Publicidad

Appendix (English)

Technical Specifications

Output Power
Drivers
Crossover Frequency 2.0 KHz
Maximum SPL
Frequency Response 53 Hz – 20 kHz
Frequency Range
Horn Coverage
Equalization
Connectors
Controls
Indicators
Protection
Power
Enclosure
Dimensiones
(height x width x depth)
Peso
Specifications are subject to change without notice.
Trademarks & Licenses
HeadRush is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. Avid and
Eleven are registered trademarks of Avid Technology, Inc. in the U.S. and other countries. All other
product names, company names, trademarks, or trade names are those of their respective owners.
2000 W
(peak, 1300 LF + 700 HF)
1000 W
(continuous RMS, 650 LF + 350 HF)
Low-Frequency 12.0" (305 mm) low-frequency driver, 3.0" (76 mm)
High-Frequency 1.4" (35 mm) voice coil, neodymium-magnet
131 dB
, 128 dB
(peak)
(+3 dB)
46 Hz – 22 kHz
(-10 dB)
90º horizontal x 60º vertical
Contour switch with low- and high-frequency +3 dB boost
(2) XLR/TRS 1/4" (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Power switch, (2) volume control knobs
ground-lift switch
(2) power LEDs
(1 front-panel, 1 rear-panel)
Electronic clip, thermal & transducer overdrive
Connection
IEC
100 V~, 110–120 V~, 220–240 V~; 50/60 Hz
Input Voltage
Fusible
100–120V T10AL AC250V
220–240V T5AL AC250V
Consumo
800 W
Trapezoidal, injection-molded polypropylene enclosure with perforated
steel grille
23.8" x 13.9" x 13.8"
605 x 354 x 350 mm
35.9 lb.
16.3 kg
high-temperature voice coil
high-frequency driver with precision waveguide
(continuous) (dB-SPL @ 1 m)
(nominal)
(1 per input)
, clip limiter LED
, EQ contour switch,
(switchable)
27

Publicidad

Tabla de contenido
loading

Productos relacionados para HEADRUSH FRFR-112

Tabla de contenido