StetSom STM0803 Manual De Usuario página 16

3. GAIN:
This control allows to
adjust the console's input gain. The
red LED (CLIP) indicates the signal
saturation.
4. HIGH:
With this control it's
possible to boost or attenuate by
±15dB the high frequencies of the
audio signal.
5. MID HIGH:
possible to boost or attenuate by
±15dB the mid-high frequencies of
the audio signal.
6. MID LOW:
possible to boost or attenuate by
±15dB the mid-low frequencies of
the audio signal.
7. LOW:
With this control it's possible to boost or attenuate by
±15dB the low frequencies of the audio signal.
8. MUTE:
With this switch it's possible to enable or disable the
channel signal without having to adjust the channel's audio level.
When pressed, the red LED (CLIP) will remain accessible.
9. LEVEL CHANNELS:
that will go from the channel to the main output (MAIN).
With this control it's
With this control it's
This control possible to adjust the signal level
3
4
5
6
7
8
9
16