HEPRO 35201 Manual De Instrucciones página 10

Assembling the
TOILET ROLL HOLDER
Art. No. 35201
A
Unwrap the received parts and make sure nothing
is missing.
It should consist of:
- One toilet roll holder
A 1
- One universal connector
A 2
B
The universal connector is disassembled, into six
parts.
C
Attach the universal connector
pole. This is done by attaching the largest clamp
to the pole and then threading part
B 2
and attaching parts
Angle part so that the accessories fit.
B 4
Find the desired height and tighten so that the
universal connector holds, but loosely enough that
the accessories can be threaded on as described
in the next step.
10
to the Gripo
A 2
through
B 1
to .
B 3 B 6
A 2
A 1
B 6 B 5 B 4 B 3 B 2 B 1