Spray Setting; Dry Ironing; Self-Cleaning; Storage - Kunft KSI-2537 Manual De Instrucciones

2.6. Spray Setting

• At any temperature by pressing the spray button a couple of times
the laundry can be damped down.
• Ensure that there is enough water in the water reservoir.

2.7. Dry Ironing

Turn the variable steam knob to the position "0" (=no steam).

2.8. Self-Cleaning

It is important to apply "self-cleaning" at least every two months to
remove impurities etc. The harder the water the more the iron should
be self-cleaned.
• Open the filling funnel and fill the water reservoir up to the MAX
position, then close the filling funnel.
• Set the temperature control to MAX.
• Insert the mains plug into the wall socket.
• Allow the iron to heat up until the temperature pilot light goes out.
Then set temperature dial to position MIN.
• Hold the iron horizontally over the sink, then remove the variable
steam control knob from the body enabling the iron to self-clean.
• Boiling water and steam will now be ejected from the holes in
soleplate. Impurities are washed away with it. Move the iron
forwards and backwards while this happens.
• Set the steam control to "0" position when the water reservoir has
become empty.
• Repeat self-cleaning if you notice that much impurity or other has
been washed out.
• Move the iron over a (preferably) old piece of cloth. This is to ensure
that the soleplate will be dry during shortage.
• Unplug and allow the iron to cool down before storing it.

2.9. Storage

• Remove the main plug from the wall socket.
• Pour any remaining water out of the water reservoir.
• Set the steam knob to no steam position.
• Stand the iron upright and let it cool down sufficiently.
10
steam iron

3. POST-SALE SERVICE

KUNFT has designed this appliance in order to guarantee maximum
reliability. However, if a problem occurs do not attempt to open the
appliance - there is a risk of electrical shock. If you are not able to
solve the problem, please contact the Costumer Support Service
of any Worten, Modelo or Continente store in order to be assisted.
Worten Equipamentos para o Lar provides a 2-year warranty for
manufacturing defects from the date of purchase of the appliance.
WARNING: Any attempt to repair the appliance without contacting
the manufacturer or seller will void the warranty.
All users must be familiar with these instructions. Knowing what
could go wrong can help prevent problems from occurring.
4. ENVIRONMENTAL
PROTECTION
In order to protect the environment we strive to reduce the
volume of packaging used, limiting it to three easily sorted
materials: cardboard, paper and plastic. The appliance is
manufactured using recyclable materials after disassembled
by a specialized company. Please comply with local
regulations concerning the recycling of all materials.
EN
KSI-2537
11