Tabla de contenido
Publicidad
Figure 15
Figure 16
Figure 17
Page 22
All manuals and user guides at all-guides.com
How To Change The Filter Bag
The machine uses a paper filter bag or a cloth filter bag. To
change the paper filter bag, follow this procedure:
To empty the cloth filter bag, follow this procedure:
CLARKE TECHNOLOGY
MAINTENANCE
WARNING: To prevent injury, always remove
the electrical plug from the electrical outlet
before doing any maintenance or repairs to
the machine.
WARNING: Maintenance and repairs must be
done by authorized personnel only. Use only
genuine Clarke Technology parts.
1. Make sure the ON/OFF switch in the "O"
position.
2. Open the front of the tank housing. To open the
tank housing, press the tank release bar. See
figure 15.
3. Hold the bag by the cardboard inlet.
4. Pull the bag out.
5. Install a new filter bag. To install a new filter bag,
follow this procedure:
a. Unfold the filter bag.
b. Hold the bag by the cardboard inlet.
c. Put the opening in the cardboard inlet over the
bag adapter. See figure 16.
d. Close the tank housing.
1. Open the front of the tank housing.
2. Remove the cloth filter bag from the bag adapter.
3. Slide the clamp off the filter bag. See figure 17.
4. Remove the dirt from the bag.
5. Slide the clamp on the bottom of the filter bag.
6. Install the filter bag in the machine.
7. Close the tank housing.
Filtra-Vac 14 and 18 Operator's Manual
Publicidad
Tabla de contenido
