Descargar Imprimir esta página

Principle Of Operations; Regulation; Temperature Setting; Time Clock Setting - ccei Bleu Titane RTi-U Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Manual
Terminals A and B are used to control the heater from a control panel. If the remote
control is not used, A and B must be bridged.

PRINCIPLE OF OPERATIONS

Regulation

The thermostat controls the heating temperature. The setting value may vary
between 10 and 40 ° C.
In addition, to adapt the heating power, switches can select the heating resistor to be
in operation.
Note :
- In the case of a 15 kW heater, resistance #1 is a 6kW and #2 is
9kW.
The thermostat is factory preset. The only value available to the
-
user is the desired temperature which is limited at 40 °C.

Temperature setting

-
Press the SET button for 3 seconds maximum
-
Press
(up) to increase the temperature.
-
Press
(down) to decrease the temperature.
-
Confirm setting by waiting a few seconds to return to the initial display.
When the output is active, the LED "OUT" lights. This means that the heater is in
heating demand.
Note : The differential set point has been factory preset at -5 ° C. This means that
when for example the temperature is set to 30°C , the heater will heat water to 30°C
then stop and resume heating when the water drops to 25°C.

Time clock setting

The time clock is useful to limit the heating period in a given time slot of the day .
(i.e. between 14h and 18h).
Indeed, the heat loss of the pool decreases when the water temperature drops. It is
interesting to let the water temperature drop during the non-use (eg at night) and to
anticipate a time of warming-up before the use phase.
The clock allows such a division of heating time and thus save power
consumption. The use of the clock depends on the needs of everyone; it must be
programmed according to individual needs.

OPERATION AND MAINTENANCE OF THE HEATER

After the installation of the heater, it is imperative to verify that no leaks exist.
Installer must also ensure that connections of cables are correct (loose cable will
cause heating of the junction).
CCEI
All manuals and user guides at all-guides.com
v1.0
EN
BLEU TITANE RTi-U
p 6

Publicidad

Capítulos

loading

Productos relacionados para ccei Bleu Titane RTi-U