Tripp-Lite B126-1A1-WHD4HH Manual Del Usuario página 9

Installation and Operation
1. Connect the transmitter to the source device's HDMI
(B126-1A1-WHD4HH) or USB-C (B126-1A1-WHD4CH) port.
2. Connect the receiver to the display device's HDMI port.
3. The transmitter is bus-powered and requires no external
power. However, if the signal is not strong enough, additional
power can be provided to the transmitter (B126-1A1-WHD4HH
only) by connecting the included USB Micro-B cable between
the transmitter's USB Micro-B port and the source's USB-A
port.
4. Connect the included USB Micro-B cable between the
receiver's USB Micro-B port and the display's USB-A port.
5. The transmitter's and the receiver's Power LEDs will illuminate
to indicate they are receiving power.
6. The transmitter's and the receiver's Signal LEDs will illuminate
to indicate they are sharing a wireless connection.
9