Wall Mount Installation - Humanscale Infinity NF Serie Instrucciones

Wall Mount Installation

1
Using Wall Mount Bracket, trace mounting holes onto desired location with arrow pointing upward.
2
Secure Bracket to wall with provided hardware.
•If mounting to drywall, use a 5/16"(7 .9mm) drill bit for drywall anchor pilot holes.
•If mounting to hardwood, use a 1/8"(3.2mm) drill bit for #10 screw pilot holes.
1
3
Place Universal Clamp Mount onto Wall
Mount Bracket.
4
Using Allen Wrench, tighten Bolt on
bottom of Universal Clamp Mount.
5
Place Light Body into hole located on top
of Universal Clamp Mount.
3
2
5
4
5