Mocreo MOSOUND Crater Guia Del Usuario página 2

English
Please read this user ' s guide before using your new speaker.
MOSOUND QUICK PAIR
STEP 1
Turn on your speaker
Press the Power button
for 3 seconds. The indicator
flashes in blue and red as
the speaker searches for a
Bluetooth-enabled device.
STEP 3
settings Bluetooth
Pair your speaker manually
Bluetooth
DEVICES
When MOCREO Crater
MOCREO Crater
appears in the Bluetooth
devices list, pair it with your
device.
STEP 4
You can control your speaker through your device or with
the speaker ' s buttons.
Over view
⑤
① ② ③ ④
1. Power Button 4.Next / Volume + by Long Press
2. Play / Pause / Receive a Call 5. NFC Antenna
3. Previous / Volume – by Long Press 6. 3.5mm AUX In Jack
Packing List
1. MOSOUND Crater Bluetooth Speaker x 1
2. USB Charging Cable x 1
3. 3.5mm Audio Cable x 1
4. Quick Start Guide x 1
STEP 2
settings Bluetooth
Setup your device
Bluetooth
DEVICES
Turn on your device' s
MOCREO Crater
Bluetooth. If it is an NFC-
enabled device, turn on
NFC as well (refer to your
device' s user ' s guide).
Or pair your speaker by NFC
Touch the NFC area of
your device against the
NFC logo on top of the
speaker.
Music control
⑥ ⑦
7.USB Charge Jack
-1-
Features
Rich, full, and dynamic stereo sound
Rechargeable batter y for up to 7 hours play time
Built-in microphone for picking up calls
USB charging port charges your devices
Waterproof Bluetooth speaker : Ipx5
Environment-friendly design of silicone material
Support NFC (Near Field Communication) technology
Compatible with most Bluetooth enabled tablets, laptops, MP3
players, and smartphones with iOS or Android™ platforms
Charging
Using the USB charging cable, connect your speaker to a computer or other USB
charging devices with a power USB port.
The charging indicator light will be red during charging.
Indicator light will be off automatically when fully charged.
Pair Your Device Manually by Bluetooth
1. Press the Power button for 3 seconds. The indicator flashes in blue and red as the
speaker searches for a Bluetooth-enabled device.
2. Turn on your device's Bluetooth (refer to your device' s user ' s guide).
3. When MOCREO Crater appears in the Bluetooth devices list, pair it with your device.
4. You can control your speaker through your device or with the speaker ' s buttons.
Pair Easily by NFC
If your Bluetooth device supports NFC (Near Field Communication), you can pair the
speaker easily.
1. Press the Power button for 3 seconds. The indicator flashes in blue and red as the
speaker searches for a Bluetooth-enabled device.
2. Turn on your device's Bluetooth and NFC (refer to your device' s user ' s guide).
3. Touch the NFC area of your device against the NFC logo on top of the speaker. The
speaker and your device will pair automatically.
4. You can control your speaker through your device or with the speaker ' s buttons.
-2-