Descargar Imprimir esta página

Olympia Tools 87-884-917 Guia De Inicio Rapido página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

AA - Base x 1
BB- Tray x 1
F - Bolts x 16
G - Lock Washer x 16
Assembly
1
Attaching the legs and castors
IMPORTANT: Ensure you mount the fixed castors on one end of
the base and the pivoting castors on the other end of the base.
Lay the base (AA) on its side.
Align the holes of one leg (A-B) with the holes along one of the
inside corners of the base (AA)
Insert four bolts (F) into the leg (A-B)v and through the base (AA).
Attach a castor (D or E) to the bottom of the base by threading
the bolts (F) through the holes and securing to the bottom of the
base using lock washers (G) and nuts (H). Repeat for the
remaining legs and castors and tighten all connections.
Warning: All screws should be tight.
AA
Safety Information
Read all instructions before assembling this cart.
Warranty
If within 1 years from the date of purchase, this Olympia Tools product fails due to a defect in materials or workmanship, return the product to Olympia Tools
with a receipt indicating proof of purchase. This warranty only applies for 90 days from the date of purchase if this product is ever used in a commercial rental
application. This warranty excludes incidental/inconse quential damages and failures due to misuse, abuse, or normal wear and tear. This warranty gives you
specific right, and you may also have other rights, which vary from state to state.
Rolling Cart
SKU 87-884-917
A-B - Legs x 4
(Marked A - left / B - right)
H - Nuts x 16
2
Attaching the tray
Place the cart assembly upright, on the castors.
Align the plastic pins located on top of each leg (A-B) into the receivers holes
in the top of the tray (BB). Push down on the top of the tray to the seat the
part. The handle on the top tray should be located over the pivoting
castors for ease of use.
Insert the connecting screws (I) between the legs (A-B) and the top of the
tray (BB). Should be tight for all nuts.
Warning: All screws should be tight.
A-B
Assembly Guide
D - Fixed Castors x 2
E - Pivoting Castor x 2
I - Connecting Screws x 4
BB
A-B
CAUTION: Do not sit or strand on this cart.
WWW.OLYMPIATOOLS.COM
Please contact:
Tel: 626-336-4999 Fax: 626-336-4899

Publicidad

loading