Twin Star 26MM1066 Instrucciones De Montaje página 7

6. Attach Side Back Panels (O) to the back of the
completed assembly from step 5. Use a Phillips head
screwdriver, tighten Screws (EE) through the
pre-drilled holes in the Side Back Panels (O).
Hardware Used
EE
Screw
7. Rest Center Back Panels (N) into groove on Mantel
Top (G) back edge. Allow the pre-installed magnets
to keep the Center Back Panels (N) in closed
position.
8. Connect the Right Front Door (M) to the Right Side
Panel (F) with the hinge pre-installed on the door,
then use a Phillips head screwdriver to tighten the
Wood Screw (GG) through the pre-drilled holes.
REPEAT WITH LEFT FRONT DOOR (L) ON
OPPOSITE SIDE.
Attach the Knob (DD) to the Left Front Door (L) and
Right Front Door (M), use the bolts attached through
the pre-drilled holes in the doors. Then use a Phillips
Head Screwdriver to tighten the bolts.
Hardware Used
Knob
DD
(with bolt)
GG Screw
All manuals and user guides at all-guides.com
x 36
x 2
x 12
6
Fig. 6
O
Fig. 7
N
Fig. 8
L
GG
EE
O
M
DD