Cleaning And Storage - Dörr 980494 Manual De Instrucciones

04 | CHARGING THE BUILT-IN LI-ION BATTERY
Before first use, please fully charge the built-in Li-Ion battery:
Flip open the rubber cover (07). The Micro USB port (8) is located underneath the rubber cover. Connect the light to your computer
using the supplied USB cable. While charging, a LED indicator located underneath the Micro USB port lights up red. After approx. 2
hours the Li-Ion battery is fully charged and the LED indicator will turn off. Remove the Micro USB cable and close the rubber cover
(07) properly to ensure the water resistance. The built-in battery cannot be replaced.
05 | FUNCTIONS OF THE LIGHT
05.1 Switching on/off, adjusting the brightness
·
To switch on the light and for 20% brightness, press the On/Off button (05) once.
·
For 50% brightness, press the On/Off button (05) a second time.
·
For 100% brightness, press the On/Off button (05) a third time.
·
To switch off the lamp, press and hold the On/Off button (05) for approx. 2 seconds.
05.2 Anti-Mosquito UV Light
·
Press the anti-mosquito button (06) to activate the anti-mosquito UV light.
·
To switch off the UV light, press the button (06) a second time.
CAUTION: Do not reach through the protective grating to the electric wire or touch it with objects. Risk of electric shock!

06 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the housing and the rubber diffusor. We recommend a soft, slightly damp
microfiber cloth to clean the outer parts of the light. Use a brush to wipe-off dead insects from the electric wire. Make sure to
switch off the LED light and the UV light and take off the light from power source before cleaning! Risk of electric shock. Store
the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.
9 doerr-outdoor.de