Craftsman 009-37715 Manual De Usuario
Craftsman 009-37715 Manual De Usuario

Craftsman 009-37715 Manual De Usuario

Cajas de herramientas de trabajo pesado

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
HEAVY DUTY TOOL CHESTS
* Product you purchased may vary from picture shown
SERVICE PARTS
CALL 1-800-366-7278 FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
CAPACITIES
• The maximum weight for each drawer should be no more than
75 lbs.
• The maximum product weight for both models, including
contents, should be no more than 650 lbs.
MAINTENANCE
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179
Ball bearing slides
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DANGER
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
• DO NOT stand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other mov-
ing object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of chest lid. Remove all
objects from chest lid before opening.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• The maximum weight for each drawer should never be
exceeded.
• Only transport this product empty. Properly secure when
transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
SAFETY
F1913

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Craftsman 009-37715

  • Página 1 OPERATOR’S MANUAL Ball bearing slides • Periodically the drawer fronts, drawer trim, and other surfaces HEAVY DUTY TOOL CHESTS should be cleaned with a mild detergent and water. • Auto wax will preserve the unit’s luster finish. Apply the wax as to a car.
  • Página 2: Tools Required

    HARDWARE CASTER INSTALLATION (26-INCH CABINET) TOOLS REQUIRED: Items Needed: #14 - 10 x 5/8-in Hex Screws (Qty: 16) 3/8-in Wrench 3/8-in Wrench 7/16-in Wrench Cross-tip Screwdriver Process: NOTE: Use adequate personnel for this operation. NOTE: Failure to install caster angles may result in premature cabinet failure.
  • Página 3: Removing Drawers

    INSTALLING DRAWERS LABELS (IF APPLICABLE) Ball bearing slide - Pull slides and slide carrier out to fully Process: extended position (see illustration.) Hold the slide on the • Apply a light film of glass cleaner to the surface where cabinet while aligning it with the slide on drawer. Slightly the label is to be applied.
  • Página 5: Piezas De Servicio

    MANUAL DE USUARIO Cojinetes de bolas • Lubrique la cerradura con grafito (anualmente). CAJAS DE HERRAMIENTAS DE TRABAJO PESADO • Limpie con detergente suave y agua los frontales y los bordes laterales de los cajones y las demás superficies. • La cera para automóviles preservará el acabado brilloso de la unidad. Aplique la cera como lo haría al carro.
  • Página 6: Ensamblaje

    FERRETERÍA INSTALACION DEL TIRADOR (26 PULG. GABINETE) HERRAMIENTAS NECESARIAS: Elementos necesarios: Tornillo Hexagonal de No. 14 - 10 x 5/8 (Cant.: 16) Llave Inglesa de 3/8 inch Llave Allen de 3/8 plg Llave Inglesa de 7/16 inch Destornillador de Punta en Cruz NOTA: Utilice personal adecuado para esta operación.
  • Página 7: Instalación De Gavetas

    ETIQUETAS (SI APLICA) INSTALACIÓN DE GAVETAS Correderas de rodamientos esféricos - jale hacia afuera Proceso: las correderas y el soporte de las correderas hasta que • Aplica una capa fina de limpiador para vidrios en la queden en posición totalmente extendida (ver ilustración). superficie donde se colocará...

Tabla de contenido