Tabla de contenido
Publicidad
Purificador de aire CLR 250
14
Informe de inspección de CADR
Date
Date
Fecha
Date
Product
Product
Producto
Product
Model
Model
Modelo
Model
Description
Descripción
Description
Filter
Filter
Filtro
Filter
Supplier
Proveedor
Supplier
Testing equipment
Testing equipment
Testing equipment
Equipo de ensayo
1.Condiciones de ensayo
1.Test conditions
1.Test conditions
1.Test conditions
1) Volumen de la cámara de pruebas:
1）Test chamber volume：30m
1）Test chamber volume：30m
1）Test chamber volume：30m
2.Descripción del funcionamiento del aparato
2.Appliance operation description
2.Appliance operation description
2.Appliance operation description
Turn on "High speed function in the testing process
Turn on "High speed function in the testing process
Encienda la "Función de alta velocidad en el procedimiento de prueba
Turn on "High speed function in the testing process
3.Test procedure
3.Test procedure
3.Procedimiento de prueba
3.Test procedure
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working status ,
1)
turn off the air purifier while checked ok .
turn off the air purifier while checked ok .
turn off the air purifier while checked ok .
2)
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidity
respective in the range of 23 〜 27 、 40%-60%RH .
respective in the range of 23 〜 27 、 40%-60%RH .
respective in the range of 23 〜 27 、 40%-60%RH .
3)
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
4)
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and turn off.
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setting to work .
5)
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant data .
6)
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
4. Resultado del ensayo
4. Test result
4. Test result
4. Test result
Natural Decay Constant Kn
Natural Decay Constant Kn
Natural Decay Constant Kn
Total Decay Constant Kt
Total Decay Constant Kt
Total Decay Constant Kt
Paticle(smoke)
Paticle(smoke)
Paticle(smoke)
CADR
CADR
CADR
CADR
5. Final result
5. Final result
5. Final result
Pasa
Pass
Pass
Pass
La producción en masa no es inferior al 90% del valor nominal CADR 250 m3/h, ese rango de tolerancia va de
Remark
Remark
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Observación
Remark
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Engineer/Date：Wu Song Xiang/2020.6.12
Engineer/Date：Wu Song Xiang/2020.6.12
Engineer/Date：Wu Song Xiang/2020.6.12
Técnico/Fecha: Wu Song Xiang, 12/06/2020
18
INFORME DE ENSAYO CADR
CADR TEST REPORT
CADR TEST REPORT
CADR TEST REPORT
2020.6.12
2020.6.12
12/06/2020
2020.6.12
Air Purifier
Air Purifier
Air Purifier
CLR 250
CLR 250
CLR 250
CLR 250
HEPA H13 +Activated carbon filter +Pre
HEPA H13 +Activated carbon filter +Pre
HEPA H13 +Activated carbon filter +Pre
Description
filter
filter
Filter
Supplier
/
/
/
Y09-301 laser particle counter
Testing equipment
Y09-301 laser particle counter
Y09-301 laser particle counter
1.Test conditions
30 m
2) Temperatura ambiente:
3
3
3
2）Environment temperature： 25.3
1）Test chamber volume：30m
2）Environment temperature： 25.3
3
2）Environment temperature： 25.3
2.Appliance operation description
Turn on "High speed function in the testing process
3.Test procedure
1）Put the test appliance in the middle of chamber according to GB/T 18801-2015, adjust the air purifier to working
turn off the air purifier while checked ok .
2）Turn on the teperature and humidity device and high efficient filtration device to control teperature and humidit
respective in the range of 23 〜 27 、 40%-60%RH .
μm de concentración inferior a 1000 uds. /L en la cámara de pruebas,
3）When particle size more than 0.3 μm concentration less than 1000 pcs /L in the test chamber ,
turn on smoke generator and pass the smoke to test chamber , turn on the fan to stir ,
stop to pass the smoke when particle concentration reach to rated value , the fan keep stiring in 10 minutes and tu
4）The fan is in the static status , turn on laser dust monitor and air purifier to switch high speed ,negative anion setti
5）Test the concentration of solid particles every 2 minutes ,be continuous to test no less than total decay constant
6）Turn off the air purifier , test natural decay constant in the same test conditions to compare .
4. Test result
Natural Decay Constant Kn
0.00141
0.00141
0,00141
Total Decay Constant Kt
0.14134
0.14134
0,14134
μm
Paticle(smoke)
μm
0.3μm−1.0μm
μm
μm
μ
0.3μm−1.0μm
0,3
m — 1,0
3
3
m
/h
252
m
/h
3
252
m
/h
252
m
3
/h
CADR
cfm
cfm
148
cfm
148
cfm
148
5. Final result
Fail
Falla
Fail
Fail
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m3/h to 275 m3/h
Remark
Engineer/Date：Wu Song Xiang/2020.6.12
Date
Client
Cliente
Client
Product
Rated voltage
Rated voltage
Tensión nominal
Rated voltage
Model
Pollutant
Contaminante
Pollutant
HEPA H13 +Activated carbon filter +Pre
Description
filter
High speed technique
High speed technique
High speed technique
Parámetro de técnica de
parameter
alta velocidad
parameter
/
Supplier
Y09-301 laser particle counter
Test standard
Test standard
Norma de ensayo
Test standard
25,3°C
3) Humedad ambiente:
3
2）Environment temperature： 25.3
3）Environment humidity： 55.5%RH
3）Environment humidity： 55.5%RH
3）Environment humidity： 55.5%RH
HR .
0.00141
0.00138
0.00138
0,00138
0.14134
0.14255
0.14255
0,14255
0.3μm−1.0μm
μm
0.3μm
μ
0.3μm
μ
m
0,3
m
252
3
m
/h
254
254
254
148
cfm
149
149
149
Pass
Reference
Referencia
Reference
Reference
Mass production is no less than 90% nominal value CADR 250 m3/h , that tolerance range from 225m
225m3/h a 275 m3/h
Approval/Date：Mr Dou
Approval/Date：Mr Dou
Aprobación/Fecha: Sr. Dou
Approval/Date：Mr Dou
CADR TEST REPORT
Client
2020.6.12
Air Purifier
220V 60Hz
220V 60Hz
220 V 60 Hz
220V 60Hz
Pollutant
CLR 250
smoke
smoke
Humo
smoke
Power（W）：
22W
Power（W）：
Potencia (W) :
Power（W）：
Rotate speed
filter
Rotate speed
Velocidad de rotación
Rotate speed
2439
（RPM）：
（RPM）：
(RPM) :
parameter
（RPM）：
/
Noise（dB）：
52.3
Noise（dB）：
Ruido (dB) :
Noise（dB）：
GB/T18801-2015
GB/T18801-2015
GB/T18801-2015
GB/T18801-2015
55,5% HR
detener para pasar el
0.00138
0.00141
0.00141
0.00141
0.00141
0,00141
0.14255
0.14134
0.14134
0.14134
0.14134
0,14134
0.3μm
0.3μm−1.0μm
0.3μm−10μm
0.3μm−10μm
μ
μ
0.3μm−10μm
0,3
m — 10
m
254
252
252
252
252
149
148
148
148
148
Fail
Approval/Date：
QM-F100-00
QM-F100-00
Client
Rated voltage
Pollutant
22W
22 W
22W
High speed technique
2439
2439
2439
parameter
52.3
52,3
52.3
Test standard
3）Environment humidity
0.00138
0.14255
0.3μm
252
254
148
149
Reference
QM-F100-00
Publicidad
Tabla de contenido
