Maxell RAD-2 Manual De Usuario página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
14. Button Lock:
• Press and hold the Menu-button (11) for two seconds to activate the Button lock
mode. The button lock icon is displayed on the LCD Screen.
• Press and hold the Menu-button (11) again for two seconds deactivate button
lock.
Note: The PTT-button (15), the Call-button (12). MON-button(5), Lamp button (20),
and the on/o button (6), will still be functional when the Button Lock is activated.
15. Display back light:
To activate the backlight of the LCD display, press any button except the Power
button.
The LCD backlight will light up for 5 seconds.
16. Earpiece connection
The Twintalker can be used with the included earpiece.
The connector is located on the upper side of the unit (8).
Insert the earpiece plug into the connector (2.5mm jack).
The small button on the earpiece has the same function as the TALK button (15)
on the unit.
When you use the Talk-button (15) from the Earpiece, you must also use the
microphone from the earpiece to talk into.
Note: Do not connect other earpieces. This may damage your device
17. Battery saving function:
When the device has not been used for seconds, the economy mode is
automatically activated. This does not a ect the reception of transmissions and
the standard mode is automatically reactivated as soon as a signal is detected.
18. BUILT-IN FLASH LIGHT
As an added feature, your radio has built-in ashlight that can be used in sending
light signals or for your lighting needs.
8

Publicidad

Tabla de contenido
loading

Productos relacionados para Maxell RAD-2

Tabla de contenido