Chauvet DJ SlimPAR T6 USB Guía De Referencia Rápida página 4

SlimPAR™ T6 USB QRG
Fuse
Replacement
Mounting
Mounting
Diagram
Control Panel
Description
All manuals and user guides at all-guides.com
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
the mounting clamp is capable of supporting the weight of the
product. For our
www.chauvetlighting.com/cables-clamps-main.html.
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Mounting Bracket
Safety Cable
(such as CH-05
from Chauvet)
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Chauvet line of
4
Safety Notes. Make sure
mounting clamps,
Bracket Adjustment Knob
EN
go to