aqprox appIP01WV4 Guia Del Usuario página 27

All manuals and user guides at all-guides.com
English
You have to register an account firstly, keep the user, password,
host, then fill in it.
Note: Only one DDNS can be chosen, for example, if you use
manufacturer's DDNS, the 3rd one won't work, if use the 3rd
DDNS, the manufacturer's one won't work.
3. Change the camera's port: The default port of camera is "80",
please change "80" to any other one you like, such as "81",
"100", "8091" etc. Click "OK", the camera will reboot, wait about
30 seconds.
Make sure the "Subnet Mask", "Gateway", "DNS Server" is the
same as your router.
4. Set Port Forwarding in the router: This is the most important
step. Set port forwarding in router refer to the IP of your camera
correctly, then the DDNS will work. Because there are so many
kinds of routers from all over the world, so it's difficult to show a
fix steps, but there are some samples of different routers' port
forwarding settings as below, just for reference:
25