Technical Specifications - Snakebyte POWER:PACK SB911866 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

POWER:PACK™

PRODUKTINFORMATION

Thank you for choosing snakebyte's POWER:PACK™. Please read this guide for important safety and

health information and retain it for future reference.

CONTENT

1 battery (7000 mAh)

1 USB-C-charging cable

FEATURES

1. Attachment clip

2. Interlock

3. USB-C charging plug

4. Kickstand

5. Charging indicator

6. USB-C charging port

7. USB charging cable

OPERATING INSTRUCTION POWER:PACK™ SB911866

NOTE: Please fully charge the POWER:PACK™ before first usage!

CHARGING THE SNAKEBYTE POWER:PACK™

• Plug USB charging cable into the USB-C charging port of the POWER:PACK™ and connect it to a

standard USB Power Supply.

• Use of an USB Power Supply with 5V/2A is recommended for optimal charging.

• The blue LED's of the charging indicator flash during charging procedure.

• After completion of charging procedure, all blue LED's of the charging indicator will continuously

light up.

• Please disconnect POWER:PACK™ from the Power Supply after charging has been completed.

USAGE OF SNAKEBYTE POWER:PACK™

• Set the interlock to UNLOCK.

• Pull up the attachment clip and flip it backwards.

• Slide the POWER:PACK™ onto the backside of the Nintendo Switch™-Console until the USB-C

charging plug is securely connected to the charging port of the console.

• Flip the attachment clip to the front and push it down, so it encloses the console.

• Push the interlock into the LOCK position.

• The console will now be automatically charged by the POWER:PACK™.

• The current charging status of the POWER:PACK™ is indicated by the charging indicator.

TROUBLE SHOOTING

Nintendo Switch™-Console is not charging:

• Make sure the POWER:PACK™ is securely connected to the console.

• Make sure the POWER:PACK™ is charged.

• Make sure the battery of the Nintendo Switch™ console is not completely depleted (identifiable by

the fact that the console cannot be switched on at all). If the battery of the console is completely de-

pleted, please recharge the console with the original power supply, until it can be switched on again.