Nexxt Solutions Nyx1200-AC plus Manual Del Usuario página 2

USER GUIDE
Thank you for purchasing the new Nyx-1200AC
from Nexxt Solutions . If any of the following items are mismatched,
®
missing or damaged, please contact the store from whom you
purchased the unit for immediate replacement.
• Dual band AC wireless router
• Power adapter 110/220V
• Ethernet cable
• User guide
1. Preliminary steps
This advanced network device works as wireless router, universal
repeater and WISP client. Before setting up the router, you must verify
that you have high-speed internet access available. The most widely
used connection nowadays is broadband DSL, cable and AP modes.
The description used in this guide is based on that type of connection.
2. Product layout
LED indicators on the front panel provide information about network
activity, the connection and link status of the ports in real time. They
also facilitate activity monitoring and troubleshooting the performance
of the device.
Front panel
1 2
SYS Wifi
dual band router
plus
3 4
WAN LAN
LED
Status
indicator
The router is starting up or it fails to function
Solid
correctly after being initialized
1. SYS Blinking The system is working properly
The system is not working properly or it has not
Off
been powered on correctly
At least the 2.4GHz or 5GHz WiFi network
Solid
is enabled
Blinking The device is actively sending or transmitting
fast data wirelessly
2. Wi-Fi
Blinking The router is performing WPS negotiation on
slowly a client device
Off The wireless function is disabled
The WAN port is connected properly but no data
Solid
is being transmitted
Blinking The device is actively sending or transmitting
3. WAN
fast packets over that port
The WAN port is either disconnected or
Off
improperly connected
Solid Port 1, 2 or 3/IPTV is connected properly
Blinking A new client device has been added to port 1, 2
twice or 3/IPTV
4. LAN
No wired device is connected to any LAN port of
the router or the wired device is not connected
Off
properly
Rear panel
6 5 4
Description
3 2 1
7