Clarion XC6210 Manual De Instrucciones Y De Instalación página 5

• Input Gain Controls: Allow you to match the source unit's output voltage to achieve
maximum output from the amplifier. The amplifier can accommodate input levels
from virtually any head unit with an input range of 200mV to 6.0V.
Regarding high-level input: Please use included high-level to RCA adapters.
• Bass Boost: The added boost produces rich, low bass frequencies that are usually
difficult to reproduce in the vehicle/marine audio environment. Bass boost frequency
(50Hz, 0~12dB).
NOTE: XC6410 – If 2CH or 4CH input is selected, bass boost only affects CH1/CH2.
If 2CH BB input is selected, bass boost will affect CH1/CH2/CH3/CH4.
• Input Select (XC6410 Only) [2CH BB/2CH/4CH]:
2CH BB: Uses CH1/2 inputs and has output from all 4 channels with Bass
Boost.
2CH: Uses CH1/2 inputs and has output from all 4 channels. The Bass Boost
will work only on CH1/2.
4CH: Uses all 4 channel inputs and has output from all 4 channels. The Bass
Boost will work only on CH1/2.
• Output Mode Selector Switch:
XC6210
STEREO: (Common applications) Input of RCA into CH1/CH2 will result in speaker
output of CH1/CH2.
CH1 BRIDGED: (Limited/Special applications) Input of RCA into CH1 will result in
speaker output of CH1/CH2.
CH1-2 Mono: (Subwoofer applications) Summed input of RCA into CH1/CH2 will
result in speaker output of CH1/CH2 or CH1+ and CH2-.
XC6410 CH1-2
STEREO: (Common applications) Input of RCA into CH1/CH2/CH3/CH4 will result in
speaker output of CH1/CH2/CH3/CH4.
CH1 BRIDGED: (Limited/Special applications) Input of RCA into CH1 will result in
speaker output of CH1/CH2.
CH1-2 Mono: (Subwoofer applications) Summed input of RCA into CH1/CH2 will
result in speaker output of CH1/CH2 or CH1+ and CH2-.
(XC6410) CH3-4
STEREO: (Common applications) Input of RCA into CH1/CH2/CH3/CH4 will result in
speaker output of CH1/CH2/CH3/CH4.
CH2 BRIDGED: (Limited/Special applications) Input of RCA into CH2 will result in
speaker output of CH3/CH4.
CH3-4 Mono: (Subwoofer applications) Summed input of RCA into CH3/CH4 will
result in speaker output of CH3/CH4 or CH3+ and CH4-.
• Auto Sense (ON/OFF)
OFF: (common application) When source unit remote turn-on wire available.
ON: (factory radio application) Must use included RCA input adapters.
Note: In this setting; do not connect anything to REM terminal.
XC6210_6410 manual 03_07_12.indd 5
All manuals and user guides at all-guides.com
5
XC6210/XC6410
3/8/2012 10:57:44 AM