Operation; Reception Of Dcf Radio Signal; Changing Basic Settings; Using The 12 / 24-Hour Display - Auriol HG04706A Instrucciones De Utilización Y De Seguridad

Reception can be considerably impaired by obstacles
(e. g. concrete walls) or sources of interference
(e. g. other electrical devices). If necessary, change
the location of the product (e.g. by putting it near a
window) if you have problems with reception.

Operation

Reception of DCF radio signal

The product automatically starts to search for the
DCF radio signal. The radio icon
indicates that the product is searching for the radio
signal.
It is also possible to start reception of the DCF radio
signal manually on the product.
Press and keep pressed the WAVE button
for longer than 3 seconds. The product attempts
to receive the DCF radio time signal. This pro-
cess takes several minutes and is indicated in
the LC display by a flashing radio symbol
Note: If the product cannot pick up the DCF radio
signal on account of an error, it is also possible to
set the time manually. As soon as reception of the
DCF signal is successful, the manual settings are
overwritten.

Changing basic settings

1. Press and keep pressed the WAVE button
approx. 3 seconds. The radio symbol
flashes.
2. Press and keep pressed the WAVE button again
for approx. 3 seconds to stop the reception of
the radio time signal.
3. Press and keep pressed the SET button
approx. 3 seconds. The acronym for the current
language flashes in the day of the week dis-
play .
9
36 GB/MT
4. Set the desired language by pressing the UP
5. Confirm your settings by pressing the SET button.
6. Repeat step 4 and 5 to set the values for year,
on the LCD
13
Hint: If you press and hold down the UP or DOWN,
you accelerate the process and reach the desired
value more quickly. This can also be used for setting
up the other functions in the following chapters.
19
Note: If the buttons are not pressed for approx.
20 seconds, it will automatically exit setting mode
and return to the normal time display.
Note: Should you be in a country in which the DCF
.
signal can be received but the time is different to
your current local time, you can use the time zone
setting to have the product display your current local
time. If you find yourself in a country in which, for ex-
ample, the local time is an hour ahead of Central
European Time (CET), you set the time zone to +01.
The product is now still controlled by DCF but shows
the time as one hour ahead of CET.
for
19
13
for
26
or DOWN button .
24
The time display flashes.
month, day, hour, minute, time zone and DCF
ON / OFF.
The following languages are available:
GER = German
ENG = English
ITA = Italian
FRE = French
DUT = Dutch
SPA = Spanish
DAN = Danish

Using the 12 / 24-hour display

While time display is indicated press the
3
UP button to switch between 12- hour and
25
24-hour format.
Note: The PM icon
for afternoons in 12-hour format.
25
on the LCD stands
14