Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PC7320_NA_IB_REVA
10/10/03
It is important to read this instruction book before
you use your new product for the first time.
System Requirements
• Windows® 98, Windows® 2000, Windows® XP, or ME and USB capability
version 1.0 or higher is required.
• CD-ROM drive
USB Port
Before Installation
If you have installed Special mouse drivers or mouse software on your system, other than the
Standard PS/2 Port Mouse or Microsoft PS/2 Port Mouse, please uninstall them before
installing this software.
Getting Ready
1. Shut down your computer.
2. Remove the existing keyboard and mouse.
3. Install the AAA alkaline batteries in the
wireless mouse.*
• Remove the battery compartment cover
on the bottom or top of the mouse by
pressing down on the tab.
• Insert the batteries as shown inside the
battery compartment.
• Replace the cover.
*Note: There are 2 ways to load batteries.
• Illustration A is an example of
a bottom loading mouse.
• Illustration B is an example of
a top loading mouse.
2
All manuals and user guides at all-guides.com
2:47 PM
Page 2
PS/2 Adapter
A
B
Connecting Your Mouse
Using the USB Port:
• Locate the USB connector on your computer or Hub and plug in the cable.
Using the PS/2 Port:
• Locate the PS/2 port on your computer and plug in the adaptor, then plug in your mouse.
Plug & Play
If you have model PC7330, no software installation is required. Your mouse is ready to use.
Quick Installation
Place the CD Driver Software in your CD-ROM drive and follow the on-screen menu
instructions. If the set-up menu does not appear, do the following:
1. Click on the Start Button and then click Run.
2. Now type <drive> :\ setup. If the Mouse CD is in drive D:, type D:\ setup.
3. Click on OK and follow the on-screen instructions.
4. Once your computer is restarted, the mouse icon will appear in the Windows
Double click on the icon to bring up your mouse control menu.
Installation Guide
You may install the mouse driver manually as follows:
Running setup.exe for the Operating System you have from this CD is the fastest way to install
this software.
Windows® 98
1. Click on the "Start" button and point to "Settings."
2. Click on the "Control Panel."
3. Double click on the "System" icon and display "System Properties."
4. In the "Device Manager" tab, double click on the mouse icon in the device list.
5. Select the proper pointing device under mouse and click the "Properties" button.
6. A property page about this mouse will appear, select the "Driver" tab and then click the
"Update Driver" button.
7. Follow the instructions on the screen to complete the driver update procedure.
system tray.
®
3
Publicidad
Tabla de contenido
