FingerTip M70C Manual Del Usuario página 42

The Pulse Oximeter is intended for use in the electromagnetic environment specified below. The customer or the user of the
device should assure that it is used in such an environment.
Immunity test
IEC 60601-
test level
Electrostatic
± 6 kV
discharge (ESD)
contact
IEC 61000-4-2
± 8 kV air
Power frequency
(50/60 Hz) magnetic
field
3 A/m
IEC 61000-4-8
Electromagnetic immunity
Compliance level
Floors should be wood, concrete or ceramic tile.
± 6 kV
If floors are covered with synthetic material, the relative humidity
contact
should be at least 30 %.
± 8 kV air
Power frequency magnetic fields should be at levels characteristic of
a typical location in a typical commercial or hospital environment.
3 A/m
42
Electromagnetic environment–guidance