Snapper POWER FLOW + SP3200 Manual Del Operador página 5

7-in-1 Nozzle
Spray Wand
PowerFlow+ Technology™
One easy twist. 7 ways to clean.
PowerFlow+ technology provides both high pressure to lift
dirt and high flow to easily wash it away. The high flow mode
enhances the cleaning experience by providing extended
reach, power soaping, and faster rinsing capabilities – things
standard pressure washers can't do.
The force behind PowerFlow+ is in the pump with two
separate cleaning modes, high pressure and high flow.
These dual modes can easily be changed via the 7-in-1
nozzle without changing nozzle tips. The high pressure
mode delivers up to 3200 PSI (pounds square inch) and is
ideal for cleaning the toughest stains, mildew, and grime
from decks, driveways, and siding. The high flow mode
delivers up to 4.5 GPM (gallons per minute) to power-rinse
away dirt, soap, and debris. The high flow mode is also
great for washing delicate surfaces such as patio furniture,
vehicles, and children's outdoor play sets and toys.
Automatic Cool Down System — Prevents internal
pump damage by discharging warm water to the
ground.
Detergent Tank — Use to hold up to one half gallon
(1.9 l) of pressure washer detergent.
Engine Switch — Set switch to ON (I) before starting
engine. Set switch to OFF (0) to shut off engine.
Low Oil Shutdown — This unit is equipped with a low
oil protection device. Oil must be at proper level for
engine to run. If the engine oil drops below a preset
level, an oil switch will stop the engine. Check oil level
with dipstick.
Spray Wand — Allows you to switch between 7-in-1
nozzle and optional accessories.
Spray Gun — Controls spray using trigger. Includes
trigger lock.
7-in-1 Nozzle — Multiple patterns for various cleaning
applications.
Spray Gun
Automatic Cool Down System
Engine Switch
Low Oil Shutdown
Detergent Tank
5