Communication Settings - FingerTec AC100C Guia De Inicio Rapido

Quick Start Guide
The Quick Start Guide is intended to pro-
vide the user with simple instructions on
how to setup the terminal date/time and
communication as well as to perform fin-
gerprint and card enrollment and verifica-
tion. For more details on other topics of
terminal management, refer to the termi-
nal's hardware user manual available in the
package or online at
• http://user.fingertec.com/user-guide.html
1
Setting the Date and Time
1. TA100C, AC100C & TA500:
Press Menu, select System, select Date/
Time and set the value.
TA200 Plus:
Press Menu, select Date/
Time and set the value.
2. Press OK to save the settings, then press
ESC to return to the main screen.

All manuals and user guides at all-guides.com
2
Enrolling Fingerprints
1. Press Menu, go to
select New User.
2. Key in a User ID, select
place the finger on the scanner 3 times
according to the instructions.
3. Press OK to save then press ESC. Press
OK again, and then ESC again to return
to the main screen.
3

Communication Settings

Press Menu > COMM > Network > Set
value for IP/Subnet mask/Gateway > OK
(Save) > Security > Device ID > Set 1 > OK
(Save) > ESC to return to main screen >
Restart to apply changes.
Default set value:
IP address - 192.168.1.201
Subnet mask - 255.255.255.0
Gateway - 192.168.1.1
Dev ID - 1
Password - 0
User Manage and
Enroll FP and