APLIC 301583 Manual Del Usuario página 21

All manuals and user guides at all-guides.com
4. Functions
The aplic Video Grabber makes it possible to record and digitize analogue video
and audio signals from an external playback device (such as a video recorder or
an analogue video camera) on a computer.
Please use the software included to transfer the films you have recorded to your
hard disk or DVD.
5. Getting started
When the device is put into operation for the first time, check the intactness of
the product or components and their function again. Please take the Video Grab-
ber out of its packaging and connect it to your computer and analogue playback
device (e.g. a video recorder or analogue video camera). The Grabber gives you
the choice between a composite and an S-video connection for the video signal.
Note: If your playback device supports both types of connectors, S-video will
provide you with a higher signal quality.
The playback device is also connected to the Cinch sockets of the Video Grabber
to transmit the audio signals.
Note: If you would like to link the Grabber to your video recorder, you can connect
it to the Scart interface of the video recorder via a Scart adapter, which is not in
this scope of delivery.
6. Driver installation
Place the installation-CD into your drive and close the drive. The Autostart
function will automatically start up the "Autorun.exe" file from the home master
directory on the CD. Depending on the operating system used, you might have to
confirm it by clicking on "Run AUTORUN.EXE".
21
English