Specifications; Product Symptoms And Troubleshooting - Phiaton BT 220 NC Manual Del Propietário

17. SPECIFICATIONS

1) Controller
- Communication Network: Bluetooth standard Ver.4.0
- Output Power: Power Class 2
- Max. Communication Range: Discoverable within 10 m / 33 ft.
- Full Charging Time: 1.5 Hours
- Call Time (NC on / off): 10 Hours / 16 Hours
- Music Play Time (NC on / off): 10 Hours / 17 Hours
- Standby Time (NC on / off): 26 Hours / 300 Hours
- Operating Frequency: 2.4 GHz (2.402GHz ~ 2.480GHz)
- Bluetooth Profile Support: HFP v1.6 / HSP v1.2 / A2DP v1.3 / AVRCP v1.5
- Audio Codec: : SBC, APT-X
- Battery: Lithium Polymer DC 3.7V / 300 mA
- Microphone Frequency Range: 10 ~ 4,000Hz
- Microphone Sensitivity: -40 dB
- Support Echo Cancellation and Talk Noise: CVC Solution
- Operating Temperature: 5 ~ 45 ℃ / 41 ~ 113 ℉
- Size: 24.1(H) x 69.9(W) x 14.4(D) mm / 9.5(H) x 27.5(W) x 5.6(D) inch
- Weight: 24 g (0.053 lb)
2) Earphones
- Type: Φ14.3 mm Driver Units
- Sensitivity: 100 dB
- Frequency Response: 10 Hz ~ 27 kHz
- Impedance: 32 Ω
- Cord length: 0.55 m, Y-type
- Weight: 8.3 g (0.018 lb)
- Mic for Noise Cancelling
※ The Specifications are subject to change without prior notice for quality improvement.

18. PRODUCT SYMPTOMS AND TROUBLESHOOTING

1) The power does not turn on:
- Charge the device. If the power does not turn on even after charging, contact Phiaton Customer
Service.
2) The device does not charge:
- Check whether the USB charging cable has been properly connected with the device.
- Check whether the PC power is on and that it has been properly connected.
- When using a separately purchased USB AC adaptor, check to see that it has been properly
connected.
3) The devices does not pair:
- Check whether the power of the 'Bluetooth Device' you want to connect is on.
12