Lovi Prolactis Instrucciones De Uso página 14

All manuals and user guides at all-guides.com
It is advised to pump regularly in order to maintain a good milk supply from your body. The alarm clock mode is
designed to maintain a regular expression cycle, by reminding you when it's time for your next pumping cycle.
After setting the time interval between each pumping, the alarm countdown will automatically start after the
previous pumping cycle has stopped. An alarm will sound when the pre-set time has passed.
How to Adjust the Alarm:
1. In clock/standby mode, press the M button
2. Two sets of time will display alternately, the alarm interval time (the time between each expression cycle) and
the next alarm time.
3. Roll the vacuum adjustment wheel
increases (+) or decreases (-) in 15 minute increments. The next alarm time will be adjusted automatically
according to the last time the pump was used.
NOTE: The alarm interval time is the time from the beginning of one expression cycle to the next expression cycle. It is not
the time from the ending of one expression cycle to the next one.
4. Press the let-down button
5. Roll the vacuum adjustment wheel
6. Press the let-down button
NOTE: While in alarm adjusting mode, the setting will be automatically saved and the pump will return to clock/standby
mode if no adjustment was made within 10 seconds.
ALARM CLOCK MODE
once to go into alarm adjusting mode.
up (+) or down (-) to adjust the alarm interval time. The adjustment
to switch to the alarm On/Off setting.
up (+) or down (-) to turn the alarm function On/Off.
again to save your setting.
12