Connecting Peripheral Equipment; Video Recorder; Other Equipment; To Select Connected Equipment - Philips 26PF8946 Manual Del Usuario

All manuals and user guides at all-guides.com

Connecting peripheral equipment

The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.
:
FM ANT EXT 1

Video recorder

:
FM ANT EXT 1 EXT 2
VCR

Other equipment

:
FM ANT EXT 1 EXT 2
10
Audio Out VGA In
EXT 2
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to EXT1,
and the equipment which produces the S-VHS signals (S-VHS and
Hi-8 video recorders, certain DVD drives) to EXT2 and all other
equipment to either EXT1 or EXT2.

To select connected equipment

n
Press the key to select
from the EXT2 socket) and
front panel.
Most equipment (decoder, video recorder) carries out the switching itself.
AV in
AV 3
S-VIDEO
DVI In Audio In
0
.
, / (S-VHS signals
EXT1 EXT2 S-VHS2
for connections on the
AV/S-VHS