Extension Cords; Care And Maintenance - Utilitech Pro WL160206 Manual Del Usuario

OPERATING INSTRUCTIONS

Extension Cords

- The maximum extension cord length recommended for this work light is 49 in. Use of extension
cords longer than 49 in. may cause a voltage drop that can dim the lights.
- Extension cords used with this work light must have an adequate American Wire Gauge (AWG) or
wire size for safe, efficient use. The smaller the gauge of the wire, the greater the capacity of the
wire (e.g. 14-gauge wire has more capacity than 16-gauge wire).
- Use an extension cord or minimum 14-gauge (AWG) 3-conductor or higher capacity wire, such as
12-gauge or 10-gauge for this work light.
- Always make sure the prongs on the plug of the extension cord are the same number, size and
shape as those on the work light plug.
- Always be sure that the extension cord is in good electrical condition.
Storage
1. Always allow the work light to cool down completely before storing.
2. Store in a safe place, out of reach of children.

CARE AND MAINTENANCE

Clean the lens, light head and light bracket regularly with a non-abrasive cleaner.
WARNING
Always make sure the work light is unplugged and completely cool before attempting to clean it.
NOTE: If you do not use the work light for a long period of time, recharge the battery every 3 to 6
months.
7