Getting Started:
1. Open the battery compartment of the remote control. Insert 1 CR2035 battery.
2. Place the lamp in the selected location on a flat and stable surface. Adjust the angle of the
holders. Direct the lamp towards a wall; connect the AC adapter cable.
3. Press the ON button on the remote control to turn the lights on.
Functions:
•
Input: 5 V DC/400 mA
•
IR remote control: Range approx. 4 m
•
Remote control buttons
•
ON: Turn lights on
•
OFF: Turn lights off
•
UP: increase brightness (6 brightness settings)
•
DOWN: decrease brightness (6 brightness settings)
•
Monochrome: Yellow/Green/White/Red/Purple/Cyan/Blue - 15 colours (brightness adjustable)
1. COLOURFUL LED LIGHT SET
2. LED LIGHT
3. HOLDER
4. A/C ADAPTER
5. UP button
6. DOWN button
ENGLISH
2