Channel Scan - Antop AT-413 Manual De Instrucciones

3 / Setting and Scanning
In the TV's setup menu, set the mode to "Antenna" or "Air", then, set TV to "Scan" for channels.
Consult the TV manual for detailed instructions.
4 / Adjusting Instruction
For the best omni-directional reception, a clear path between transmitter and antenna is
needed. It is better to keep the antenna in a horizontal position. In the case that there are
obstacles surrounding the house, the signal will be reflected and weakened. Please release
screw "A" and adjust the antenna up and down for the best reception angle, then fasten
the wing nut.
All manuals and user guides at all-guides.com

CHANNEL SCAN

scanning for channels
3
Screw A
4