Regent i351s Manual De Uso página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
EN
Alarm
Dual alarm clock
There are 2 alarm clocks and the following settings:
• Alarm Scheduling: You can schedule an alarm to repeat for each
day, specific day of the week, or select only a single alarm.
• Alarm tone: Wake up to radio (this must be a preset station),
Wake up to melody and Wake up to sound.
• Alarm Volume: Select this option to adjust the desired volume level.
Snooze alarm
If you want to take a nap or need an alarm clock in a short time, you can use
this feature. You can choose a time from 5 to 120 minutes. The snooze function
is not available for the NAP alarm. Note: The NAP alarm will only beep.
Snooze
When the alarm sounds, pressing any key except the STANDBY button will take
you to <Snooze> mode. The alarm will sound again 5 minutes later. You can always
press the STANDBY button to cancel the alarm. Note: It will automatically beep after
1 minute for network problems that make the wake of the radio not to work.
Timer
Press ^/v/</> on the remote control to set the timer, then press OK to confirm.
Dimmer
You can adjust the backlight of the LCD display with the following settings:
• Power Saving - You can set the backlight to dim when there
is no operation for a certain period of time.
• Enable - You can adjust the backlight level for the working mode.
• Display - You can choose between color and monochrome style display.
Energy management
This feature allows the receiver to go into standby mode to save energy when no
internet signal is received. The default setting is 15 minutes. When the receiver receives
no internet signal, it will go into standby mode after 15 minutes. Other timeframes
are available: 5 minutes and 30 minutes. The setting can also be turned off.
Sleep timer
You can set a sleep timer to put the radio into standby mode after a certain period of time.
The available time frames are from 15 minutes to 180 minutes in steps of 15 minutes.
You can also make settings with the SLEEP button on the remote control: after pressing
the SLEEP button, you will see the sleep timer in the top right corner of the display.
Weather
You can set to display weather information in standby mode by
selecting different regions and temperature unit. To turn off the weather
display, go to Setup> Weather> Show in Standby> select Off.
Local radio configuration
The radio will automatically detect local stations - just press LOCAL on the remote to access
radio stations in your area. You can also find this setting in <Internet Radio> menu. If you want
to change local stations to other countries, you can select „Manual Setup" to make the change.
Playback configuration
UPnP playback preference settings. You can set the playback
to Off, Repeat One, Repeat All, Shuffle Songs.
Equalizer
Choose your preferred equalizer to suit your preferences.
BT Tx
Select to enable or disable the BT Tx function.
Resume after power on
If turned ON, the receiver will resume playing the last station listened to
when turned on again. The ON setting is enabled by default.
Device
Change the name of the device
The receiver can play music from DLNA-compatible devices that are connected to the same
Wi-Fi network. The receiver will be detected by DLNA devices under the name „REGENT i351s".
This is the default name. You can use this setting to rename the receiver to anything else.
Remote application - AirMusic control
You can use the free AirMusic Control application to manage the receiver using your phone
or tablet. The application is available in Android Google Play and Apple App Store. Both
the receiver and the device with the application installed must be in the same network.
Software update
Information about updating the receiver's software will appear on the display when the
manufacturer releases the update. Download update is from the internet and requires
internet connection for it to take effect. Note: This option is for manufacturer use only.
Restore default settings
With this option you can restore the receiver settings to the original state.
Note: All your settings will be lost when you restore default settings.
Use your phone, tablet or computer as a remote control for
Spotify. Go to spotify.com/connect to learn how.
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido