Displaying The World Times - Rocktrail Z29592 Instrucciones De Utilización Y De Seguridad

5. Repeat steps 3 and 4 to set the values for minutes and
seconds.
6. Press the ALTI / BARO button
down mode.
7. Press the ST. / STP. button
8. Press the ST. / STP. button
note: During the last 10 seconds, a signal will sound
every second. When the countdown has finished, a
signal will sound for thirty seconds.
9. Press any button to stop signal.
After the signal, the set countdown time will appear in
the display
10. Repeat the previous steps to set another countdown time.

Displaying the world times

Q 
note: You can display the times in up to 60 towns around
the world.
j 
P ress the MODE button
WT appears in the display
j 
P ress the RESET
town you wish to have.
note: The towns are indicated by means of letter
codes. Please consult the table in the section called
All manuals and user guides at all-guides.com
4
4
again.
5
2
or ST. / STP.
1
to get back to count-
3
to start the countdown.
again to stop the countdown.
as often as necessary until
.
5
button to select the
4
GB/MT 117