Cleaning And Storage; Technical Specifications; Scope Of Delivery - Dörr DLP-70W Manual De Instrucciones

05.4 Luminous button
Pressing the "Luminous" button (03a) switches the permanent light to stand-by mode. The light output is reduced to zero. The colour
temperature jumps to the mean value of 4400K. This is useful when taking a break after use. The continuous light is then ready for use again
in a very short time. Simply press the Power+ button (05a) to get it working again.
05.5 Section button
By pressing the "Section" button (03c) you can switch between 3 colour temperature values: 3200K, 4400K and 5500K. This is
useful if you want to change the colour temperature quickly, for example to switch from daylight to artificial light. This is more
effective than using the COLOUR buttons.
05.6 Effects button
This button has no function in connection with our DLP-70W and DLP-100W.

06 | CLEANING AND STORAGE

Do not clean the device with petrol or strong detergents. We recommend a lint-free, slightly damp microfibre cloth to clean the
external components of the device. Before cleaning, switch off the device and remove the batteries. Store the device in a dust-
free, cool, dry place. The device is not a toy: keep it out of the reach of children! Keep the device away from pets.

07 | TECHNICAL SPECIFICATIONS

Radio frequency
Range approx.
Channels
Groups
Power supply
Dimensions approx.
Weight approx.
Dörr GmbH reserves the right to make technical changes without notice.

08 | SCOPE OF DELIVERY

1x Radio remote control
1x Safety instructions
10
2.4 GHz
30 m
0 - 50
A - F
2x AAA LR03 1.5V (not included)
5 x 13 x 1.5 cm
65 g (without batteries)
doerr-foto.de