Use - Glatz Suncomfort Flex Roof Manual De Instrucciones

Use

Slider
Pivot joint
Upper pole
Lower pole
1
Click
Click
Cover
Ribbons
Ribs
Clamping screw
Base
(optional)
Open balcony roof
Remove the protective cover, if present
1. Loosen the ribbons
2. Align roof element horizontally
3. Slide both sliders outwards
4. Both slider engage audibly
!
The sliders must engage audibly.
38 39
2
Adjust the balcony roof height
When adjusting the balcony roof
height, keep a firm hold on the upper
pole, to prevent it lowering acciden-
tally.
1. Hold upper pole firmly
2. Loosen clamping screw
3. Adjust balcony roof height to suit
4. Tighten the clamping screw
3
Tilt the balcony roof canopy
When tilting the balcony roof, hold
the moving part firmly.
1. Hold moving part firmly
2. Loosen the clamping screw on
the joint
3. Tilt balcony roof (possible on all
sides)
4. Tighten the clamping screw on
the joint
4
Close balcony roof
1. Balcony roof canopy in an upright
position
2. Unlock slider
3. Pull both sliders inwards
4. Pull out / wrap fabric segments
5. Tie the ribbons
!
If necessary, place balcony roof
vertically and attach protective
cover.