Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Sicherheitshinweise
Safety information
Avvertenze per la sicurezza
Instructions de sécurité
Advertencias de seguridad
Safety precautions: Before commencing mounting
the non- personal fall protection and fall-arrest
systems required by DIN 18338 (Roof Covering and
Roof Sealing Works) and DIN 18451 (Scaffolding
Works) are in place. See also Builders' Protection
If non-personal fall protection or fall-arrest systems
sonnel must be secured by means of suitable safety
harnesses!
bodies.
If non-personal fall protection or fall-arrest systems
ble safety harnesses may lead to falls from heights
and therefore cause serious or lethal injuries!
sliding or falling over may lead to dangerous falls!
Whenever you are near live overhead electric cables
it is ensured that they are voltage-free and this
–
is secured for the duration of work.
the live parts are secured by covering them or
–
cordoning them off.
the prescribed safety distances are maintained.
–
Voltage radius:
1 m ................voltages up to 1000V
3 m ................voltages from 1000V to 11000V
4 m ................voltages from 11000V to 22000V
5 m ................voltages from 22000V to 38000V
> 5 m in case of unknown voltages
10
whenever possible. Safety harnesses should only be
or steps on wooden ladders!
Ensure that ladders are put up safely. Observe the
correct leaning angle (68° - 75°). Prevent ladders
hooking devices).
Only lean ladders against secure points. Secure
Contact with live electric overhead cables can be
lethal.
Wear protective goggles when drilling and handling
collectors!
Wear safety shoes when carrying out installation
work!
Wear cut-proof safety gloves when mounting
collectors!
Wear a helmet when carrying out installation work!
EN
30°
45°
60°
Publicidad
Tabla de contenido
