Wolder miSmart SMILE Manual De Usuario página 50

4 4 4 4 . . . . Bluetooth Bluetooth Bluetooth Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Press home>menu, the touch settings.
2) Touch wireless and internet, then choose Bluetooth box to open the Bluetooth function. After started, the status box will
show this icon (
3) Touch Bluetooth settings, all the devices founded will display in the list under the icon.
（select the box "can be detected", set it to be detected, the other Bluetooth devices will be able to find the phone.）
important：the maximum detecting time of the phone is 2 minutes.
•
Pairing and connection of Bluetooth headset
1) Press home>menu, then touch settings.
2)Touch wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the
Bluetooth devices within range ,and show the founded devices in the list under the icon.
•
Tips：
a. If the list can't find your equipment, touch scanning equipment to re-scan it.
b. Make sure that the devices wanted are under the detected mode.
3) Touch headset in the equipment list to finish the connection.
•
Notices： generally Bluetooth devices need password to be paired, often use 「 0000」 as the default password.4)The
pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset
connected to your phone, the status box will show this icon（
headset to make or receive callings.
•
Cut the connection to the Bluetooth
1) Press home>menu>settings>wireless and internet>Bluetooth settings.
In the list of Bluetooth equipment, touch or tap and hold the connected hand-free headset.
2)
3) Press and select "cancel the pairing".
•
Bluetooth proximity sensor
7
User Manual miSmart SMILE ☺
). Touch "scan for devices"the it starts to scan for all devices within range.
）means connected. Then you can use the