Electrical Connection - Roros Metall Vero Manual De Instrucciones

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-
pole switch having a contact gap of at least 3
mm.
• Remove the grease filters (see paragraph Main-
tenance) being sure that the connector of the
feeding cable is correctly inserted in the socket
placed on the side of the fan.
Flue assembly
The chimney can only be installed with exhaust-
ing hood
• Fasten the angle iron 15 to the hood canopy
using the screws 12d (2,9 x 9,5) provided.
Upper exhaust flue
• Slightly widen the two sides of the upper flue
and hook them behind the brackets 7.2.1, mak-
ing sure that they are well seated.
• Secure the sides to the brackets using the 4
screws 12c (2,9 x 6,5) supplied.
Lower exhaust flue
• Slightly widen the two sides of the flue and
hook them between the upper flue and the wall,
making sure that they are well seated.
• Fix the lower part laterally to the hood body
using the 2 screws 12c (2,9 x 6,5) supplied.
Screen Opening
Before carrying out any Use and Maintenance
operations, open the Screen.
EN
All manuals and user guides at all-guides.com
8 8