MyCharge 6000 Manual Del Usuario página 14

occurs again, you may have a combination of
devices that require too much power to connect simultaneously.
• My device is not charging and all Power Bank's LEDs are flashing: Your
Power Bank is out of power. Connect the included USB cable to Power Bank and the other end
to a power source.
• My Apple device is not syncing: Confirm that your device is properly connected to the Apple
connector. Confirm that the Power Bank is properly connected to your computer with the included
USB cable. Make sure that the function switch is in the off/sync position (right with red indicator).
For additional troubleshooting tips, please visit us at
www.mychargepower.com
14