JUNO 2DTCA Instrucciones De Instalación

JUNO 2DTCA
Drop Tile Ceiling Adapter
For use with Juno 2" LED Recessed in drop tile ceilings.
WARNING: For your safety, read and understand instructions
completely before starting installation.
SAVE THESE INSTRUCTIONS
INSTALLATION WITH
JUNO 2" LED RECESSED
Step 1. Slide fixture thru ceiling opening and center
fixture in opening. Insure that alignment tabs are in
the hole (Figure 2).
Step 2. Place ceiling adapter against ceiling behind
ceiling clamps (Figure 3).
Step 3. Tighten screws to secure adapter ring
against the ceiling (Figure 4).
DO NOT OVER TIGHTEN SCREWS.
Continue fixture installation per fixture instruction
sheet.
Alignment Alignment Alignment
Tabs Tabs Tabs
Figure 2
WARRANTY
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Technical Services Phone (888) 387-2212
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-recessed
©2017 Acuity Brands Lighting, Inc
INSTALLATION INSTRUCTIONS
Figure 3
Rev 2/19 P4722
Figure 1
Figure 4
1 of 1