To Page The Handset; To Lock The Keypad; Using Your Cordless On A Pabx; Redial - Linkcom Link 680 DECT Manual De Instrucciones

All manuals and user guides at all-guides.com
This function is useful if you can't find your handset.
• On the base unit press and release the
• To stop the handset ringing, on the handset press any button or numbered key.
To lock the handset's keypad so that no buttons can be pressed.
• To block the handset keypad, while handset is idle press
a confirmation beep and appears on the display.
• To unlock the keypad, press
PAUSE FUNCTION
If you have a PABX connection you need to pause for a few seconds between dialling the system code and the
actual phone number. To pause, press the
This is the flash key, press it during the line is engaged to send the flash signal.
• To turn the ringer temporarily off, when the handset is idle press and hold for a few seconds the button, the
symbol will appear on the display.
• To turn the ringer back on, press and hold again the button
display.
IMPORTANT: with this function active only the base rings when receiving a call, while the handset only shows
a symbol on the display.
• Press the button and hold 3 second until you hear a beep sound.
• The display will show "S" for a short flash time at 100ms.
• To come back to a 270ms flash time, do the same again, the display will show "L" for a long flash time
DECT GAP Link 680

6.11 TO PAGE THE HANDSET

button. The handset rings with a special tone

6.12 TO LOCK THE KEYPAD

, again and hold it until

6.13 USING YOUR CORDLESS ON A PABX

button and a dash "-" will appear on the display.

6.14 REDIAL

6.15 TURNING RINGER TEMPORARILY OFF

6.16 SWITCHING FLASH TIME

and hold it for a few seconds; until you hear
disappears from the display.
, the symbol, will disappear from the
13