Onkyo SIRIUS TX-SR705S Instrucciones De Uso página 3

TX-SR705_SR_EnFrEs.book Page 3 Wednesday, May 30, 2007 4:00 PM
Selecting SIRIUS Satellite Radio
1
Press the [TUNER] input selector
button repeatedly to select
"SIRIUS."
If "CHECK SR TUNER" appears on
the display, make sure the SiriusCon-
nect receiver is connected properly. If
"ANTENNA ERROR" appears, make
sure the antenna is connected properly.
Signing Up for SIRIUS Satellite Radio
Before you can use SIRIUS Satellite Radio, you must
first sign up for an account. You'll need a major credit
card and your SIRIUS Satellite Radio ID, which you can
get from the AV receiver, as explained below, or from the
SiriusConnect Home tuner package.
1
Use the TUNING Up and Down
[ ]/[ ] buttons to select
channel 0.
Your SIRIUS Satellite Radio ID num-
ber is displayed. Write it below.
ID
2 To sign up, go to:
http://activate.siriusradio.com
Or call: 1-888-539-SIRIUS (7474)
Note:
• Another way to check your ID is to press the [SETUP]
button. Use the Up and Down [
select "4. Source Setup," and then press [ENTER].
Use the Up and Down [
"3. SAT Radio," and then press [ENTER]. Use the Up
and Down [ ]/[ ] buttons to select "SiriusID," and
then press [ENTER].
Press the [SETUP] button when you've finished.
All manuals and user guides at all-guides.com
]/[ ] buttons to
]/[ ] buttons to select
Selecting SIRIUS Satellite Radio Channels
There are three ways to select SIRIUS Satellite Radio
channels:
• Channel Search mode: select any channel.
• Category Search mode: select channels by category.
• Direct tuning: enter channel number.
Number
buttons
■ Channel Search Mode
1 Press the [RECEIVER] button,
followed by the [ENTER] button
to select "Channel Search"
mode.
ENTER
2
Use the Up and Down [
buttons to select a channel.
ENTER
Channel number
You can also use the Left and Right
[ ]/[ ] buttons to select a category.
D.TUN
RECEIVER
ENTER
]/[ ]
Channel name
3
En-