Installation and startup
Basic functions
TV mode
OK
Channels
1 CNN
·
Use the arrow buttons Up, Down,
Prog + - to switch through the channels.
Use the arrow buttons Left, Right to
switch through channel groups.
i
Record
Prerequisite for recording. Connection to
the formatted internal hard disk or
external FireWire (needs to be activated
first) hard disk, or access to a released
one in the network. The ReelBox Lite
determines the priority of the connected
components according to the priority
list:
1.
Internal hard disk
2.
Network release
3.
FireWire hard disk
If you want to reorder the priorities, refer
to the instruction manual.
i
12
All manuals and user guides at all-guides.com
Record running program
The red Record LED on the
casing lights up.
It is possible to change the channel
during recording, as well as to start
the media play-back or record further
programs.
i
End current recording
Menu
ReelBox Setup -Disk 5% 37:50 free
1 TV
·
End recording CNN-1
OK
Confirm ending.
OK
Timer recording
Timer
·
new
· · ·
Edit timer
·
OK
or set timer with Electronic Program
Guide (EPG).
B
Select program in EPG. The timer is
programmed automatically with
information from the EPG.
i
Interrupt timer/EPG recording
Timer
+> 2
Thur24 13:08 15:00 CNN
·
delete
If only one LNB is connected, then you
can see only those channels during a
recording that have the same frequency
as the first recording. If two or more
LNBs are connected, this limit does not
apply.
i
· · ·
GB