VIETA VC-HA4000BT Manual De Usuario página 14

RETUNE L mode: selected as 90 seconds.
RETUNE S mode: selected as 60 seconds.
6) MASK DPI/MASKALL:
MASK DPI mode: masks only the AF which has
different PI.
MASK ALL mode: masks the AF which has different
PI and NO RDS signal with high field strength.
7) BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any
key is pressed.
BEEP OFF mode: The beep sound is disabled.
8) VOL LAST/VOL DEFA
VOL LAST: The radio switches on at the actual
volume it had when it was last switched off.
VOL DEFA: After pressing SEL button, AVOL will
be displayed. Then you can pre-select a constant
switch-on volume by using the VOL knob.
9) CLK ON/OFF
CLK ON: Clock will always show on the display when
power off.
CLK OFF: Clock will disappear on the display when
power off.
9-14. PRESET STATION MEMORY AND TOP/>||,
INT, RPT, RDMBUTTONS
a) During radio mode:
Go to any preset station by pressing one of the 6
preset station buttons (1-6).
If one of these buttons is pressed for more than 2
seconds, the station currently being listened to will
be memorized into the selected preset button.
b) During disc, MMC/SD or USB mode:
1) Press the TOP/ >|| button briefly to interrupt the
playback of the disc, MMC/SD or USB. Press again
to resume normal playback of the disc, MMC/SD or
USB.
Press the TOP/>|| button and hold for approximately
0.5 seconds to play the first track of the disc, MMC/
SD or USB.
2) Press the INT button to sample the first 10 seconds
part of each track, and the INT ON will be visible on
the LCD display.
In the process of INT, pressINT button again to stop
sampling and to continue playing the current track,
and the LCD will display INT OFF.
3) Press the RPT button once to play the current
track repeatedly, and the RPT
ONE will be visible on the LCD display.
During MP3/WMAdisc, MMC/SD or USB mode, press
and hold the RPT button to play the current folder
repeatedly, and the D-RPT will be visible on the LCD
display.
14
All manuals and user guides at all-guides.com
In the process of RPT, press RPT button again to stop
playing repeatedly mode and the LCD will display
RPT OFF.
4) Press the RDMbutton to play all tracks on disc in
randomorder, and the RANDOMwill be visible on the
LCD display.
In the process of RDM, press RDM button again to
stop playing in random order and the LCD will display
RDMOFF.
Press and hold the RDMbutton to play the current
folder in randomorder, and the D-RDM will be visible
on the LCD display.
5) Press the 5 and 6 button to move up and down10
tracks at a time.
When the remained total tracks is lack of 10, the both
buttons are inactively.
Press and hold the 5 and 6 button to select next or
previous folder to be play.
15. MODE BUTTON
Press the MODE button to change among tuner
(radio), disc (whena disc is loaded), USB (when an
USB stick is inserted),SD and AUX mode.
16. AUX INPUT JACK
Press the mode button to select auxiliary input
playing mode. Then you can connect any matched
external audio device to this socket. Use the volume
knob to adjust volume.
17.USB SOCKET
In order to play the file in the USB stick, turn over the
plastic cover cap then insert the USB stick into the
USB socket. The systemwill change into the USB
mode automatically, and then play the first file in the
USB.
18. BAND BUTTON
During radio mode:
Press this button briefly to select the radio
broadcasting band you would like to hear. The AM/
FM band is toggled cyclically through the tuning
bands:
->FM1-> FM2 -> FM3 -> AM 1->AM 2 ->.
During MP3 file in disc, or USB mode:
Press and hold this button to turn to TRACK SEARCH
mode, the LCD will display TRK 000 and flash the
biggest digit 0 that the USB stick contain. (if the
number of tracks is less than 100 and more than 9, it
will be TRK 00)
Then rotate the VOL knob to select the number of the
flashing digit from0 ~ 9.
Then press SEL button to confirmthe number and
flash next smaller digit 0.
With the same means, select the number of the
flashing digit. After finishing selecting the number of
CD/USB/SD Android Radio