Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
WIRING DIAGRAM
WIRE CONNECTION
BASIC OPERATION
Initial System Starts- up
1. Operating the unit for the first time or after replacing the car battery, you should press (18) to
detach the front panel, and LED (19) will be blinking. Press (1) Reset button with a pointed object
(such as a ballpoint) to set the unit to initial procedure.
Turning the Unit On/Off
2. Press POWER button (2) to turn on the unit.
Press it again to turn off.
Vol/ bass/ Tre/ BAL (L- R) Selector
3. For Volume Control (3), rotate VOL knob clockwise to increase the sound level, and anticlock-
wise to decrease the sound level.
Repeatedly press (3), button to select the desired mode in the following order:
NOTE: After selecting the desired mode, you can adjust the current level by rotating the (3) knob.
NOTE: If you turn on Preset EQ function, the Bass and Treble cannot be adjusted. At moment,
repeatedly press the button will change the mode in following order
NOTE: If you don't adjust the knob within 5 seconds after selecting the desired, the unit will
automatically return to the current mode being displayed.
6
Publicidad
Capítulos
