Product Components - GRE P1117 Manual De Instrucciones

Product components

STICK VAC consists of six main parts:
(1)Suction head
(4) The telescopic poles
(1) (2)
Basic Usage
The STICK VAC is not intended for use for inground swimming
pools, it is only designed for cleaning for above-ground swimming
pools, hot tubs and spa . Improper uses may result in damaging to the
cleaner and willnotunder warranty.
WARNING!
(1) The cleaner is designed for underwater aapplication only,
please submerged during use, otherwise it may damage the
cleaner
(2) Suitable for pools and spa till water depth 120CM, minimum water
depthis 35CM.
(3) Switch handle mustn't be submerged in water ,water entering
thechamberwillruinthe cleaner.
(4) Please ensure that the filter bag is properly installed before using.
(5) Operating water temperature:4 C(39.2 F)-35 C(95 F).
1. Pease screw the suction head into the
bottom of the telescopic (fig.A)
(2)The filter bag
(5)The battery holder
(3)
(3)The main body
(6)The battery compartment cap
5
(4)
(AA) （Not included）
(5) (6)