bbluv Cam Manual Del Usuario página 20

Cäm
EN
TROUBLESHOOTING
PROBLEM
No image
Beeping sounds
No sound
Black & white
image
WARNINGS
• Strangulation Hazard: Children have STRANGLED in cords.
Keep this cord out of the reach of children (more than 3 feet (0.9m) away.)
• Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
CAUTION
• To properly use the Cäm, please read the user manual carefully.
• For your safety, make sure to only use the AC converter and rechargeable
battery provided.
20
1. Make sure the camera and monitor are in
operating range.
2. Check if the monitor battery is fully charged
and that the camera is properly connected
to the power supply.
Check whether one of the following
alerts/alarms is active:
1. Low battery alert
2. High/low temperature alert
3. No signal alert
4. Feeding alarm
Press the up/down volume buttons to adjust
the volume.
1. Check whether there is sufficient ambient
light.
2. The baby's unit might be in night vision mode.
3. Two cameras are pointing in the same range.
Try moving the cameras slightly away from
each other until you see the image properly
SOLUTION
ENGLISH