Maintenance (All Units); Specifications; Warranty And Registration - Sapphire Scientific SS-P Serie Instrucciones De Uso

MAINTENANCE (ALL UNITS)

WARNING: Unplug machine before
servicing. Possibility of electrical shock.
WARNING: Interior components may be hot
after operation. Let unit cool completely
before servicing.
DAILY OR AFTER EACH USE
Clean vacuum cutoff valve and strainer (Fig. 7).
Empty recovery tank, then open recovery tank lid. Grasp
valve assembly and gently pull downward, taking care
not to distort the strainer screen. Rinse assembly clean
and make sure float ball moves freely inside assembly.
Reinstall securely.
Clean the solution inlet filter. Loosen tank attachment
screw (Fig. 1) and open unit. Remove filter cover and
strainer screen (Fig. 5). Rinse strainer screen clean in
warm water. Replace strainer and retighten filter cover.
Note: The SS-P 1200EX is equipped with two filters: a
solution inlet filter and a recovery tank outlet filter (Fig.
6). Both filters should be cleaned after each use.
AS NEEDED
Lubricate pressure regulator O-ring. Access O-ring by
unscrewing and removing pressure regulator (Fig. 2, G).
Lubricate with a suitable O-ring lubricant.
Lubricate the solution line quick-connect coupling
(Fig. 1) with a small amount of rust-inhibiting oil such as
LPS-3 or WD-40.
To maintain appearance, wipe interior and exterior
surfaces with a damp cloth. For deep cleaning and a
lasting, protective shine, use Dri-Eaz MicroGuard
Cleaner and MicroGuard Protectant, available from your
Sapphire distributor.
24-00265 C 2012-01 Warranty 49-055
All manuals and user guides at all-guides.com
5
WARRANTY
Warranty information is available from your dealer or at
www.sapphirescientific.com.
Warranty registration
Visit www.SapphireScientific.com to register your
purchase. Registration allows us to better assist you with
using, maintaining or servicing your equipment, as well
as to contact you in case we have important safety
information concerning your Sapphire Scientific product.
If you determine service is required, have your
equipment model, serial number and original proof of
purchase available and call your distributor for
assistance with obtaining a return material authorization
(RMA).

SPECIFICATIONS

ALL MODELS
Vacuum
Double dual-stage. Installed in series.
motors
Solution tank 10 gal. | 37.9 l
Capacity
Recovery tank: 10 gal. | 37.9 l
Rotomolded polyethylene housing and handle;
Construction
semi-pneumatic wheels.
Dimensions 39.5 × 32 × 19.75 in.
(H × L × W) 100.3 × 81.2 × 50.2 cm
Model Features
SS-P 150 150 PSI
#78-001
SS-P 150H 150 PSI, 2000W heater
#78-002
SS-P 500 500 PSI adjustable. Pressure
#78-003 gauge.
SS-P 500H 500 PSI adjustable. 2000W
#78-004 heater. Pressure gauge.
S-SP1200EX 1200 PSI adjustable. Pressure
#78-005 gauge. Auto-fill. Auto-dumpout.
CONTACT
Sapphire Scientific
2604 Liberator
Prescott, AZ 86301
800-932-3030 www.sapphirescientific.com
Dry weight
75 lbs.
34 kg
83 lbs.
38 kg
90 lbs.
41 kg
98 lbs.
45 kg
124 lbs.
56 kg
Sapphire Scientific